Atlantis DISKMASTER NAS65020 Manual de usuario Pagina 1

10 USBCopy allows to quickly back up data from an USB storage device (USB flash, USB card reader or USB HD) to DiskMaster with just on

100 Settings  Host Name: Identifies the iTunes Server on the network. Please give the iTunes Server a distinctive name on DISKMA

101 When the iTunes service is active into DiskMaster is possible to save MP3 files in the folder specified in the Shared Folders and playback d

102 Adjustment is recommended for advanced users only.

103 APPENDIX I: UPnP Media Server Click on UPnP Media Server, the image will appear below. The menu consists of two sub-menu:  Status: allows to

104 Settings  Host Name: Choose your own name for the UPnP Media Server which must be distinctive to other UPnP servers in the network.  Rescan

105 APPENDIX L: MultiProtocol DownLoad Click on Server-> Multiprotocol DownLoad, the image will appear below. The menu in question consists of t

106 Settings  The Maximum number of peers per torrent: Limits the amount of connections that can be made per torrent.  Keep each torr

107 Task List Click NEW ( ).  Default folder: selected to place the file in the folder selected in Download folder name.  Create a new folder:

108 APPENDIX M: Technical Features Protocols IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP

109 System Requirements for SmartSync Pro  Windows 2000, XP, Vista, 7, Server 2003, Server 2008, and Server 2008 R2. Both x86 and x64 versio

11 1.3 Choosing a place for your DiskMaster When selecting a place to set up your Disk Array, be sure to follow these guidelines:  P

110 APPENDIX N: Compatibility List Brand Model MB Western Digital WD5000AAKS 500 Western Digital WD10EADS 1000 Western Digital WD10EARS 1000 Western

Atlantis SpA Via S. Antonio, 8/10 20020 Lainate (MI) info@a

12 1.4 DiskMaster Application When you have completed the steps in this Quick installation Guide, your connected network should look similar to this

13 1.5 The Front LEDs and Rear Ports PORT/Button/LED MEANING 1 HDD A LEDs HDD A indicators. 2 HDD B LEDs HDD B indicators. 3 Power LED Power ON/OFF

14 defaults. After the device has turned on (turn on the power and wait 3 minutes), press and hold reset button for 5/10 seconds, then

15 1.7 Default Settings The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manua

16 1.9 Building DiskMaster HDD System If the hard disks are being installed for the first time, you need to initialize the disks b

17  Insert NAS system CD-Rom in to your computer, and run NasLink.  Pressing the Refresh List button.  NAS in the same subnet will automatical

18 When you first time login DiskMaster or System Disk hasn’t been created, you will be asking if you would like to do RAID configuration.  Cl

19 There are 2 differents RAID mode:  RAID 0: RAID 0, known as disk striping, has generally the best performance, but does not offer any

ITALIANO Questo prodotto è coperto da garanzia Atlantis O

20 There will two more items, Server and GUI options show in the left side box. At the right side, besides the basic DiskMaster information, there

21 RAID Mode You need to install 2 HDDs to create RAID system on DiskMaster. When you first time login DiskMaster or System Disk hasn’t been

22 There will two more items, Server and GUI options show in the left side box. At the right side, besides the basic DiskMaster information, there

23 1.10 Mapping a Network Drive Default SAMBA/FTP system account and password  Factory Default ID: sysadmin  Factory Default PW: atlantis  Th

24 Mapping a Network Drive in Windows Vista/7  Start->Computer  Click on Map Network Drive.  Follow the setup wizard and fill in t

25 2. WEB Configuration Open the web browser, enter the local port IP address of this device, which defaults at http://192.168.1.10, and click “Go”,

26 2. Advanced Web Configuration La configurazione del dispositivo può essere fatta esclusivamente via WEB. Lanciare il browser web e digitare htt

27 Digitare username/password (syadmin e atlantis) e cliccare su Login. Apparirà a questo punto il Menù Principale, nella cui partesinistr

28 La schermata principale, richiamabile cliccando su Home, mostra le seguenti informazioni:  Kernel Version: Viene mostarta la release

29 2.1 SYSTEM->Networking Management NetWork Settings These settings help DiskMaster connect to the network  IP Status: The default value

3 INDEX 1. 1. Product Overview ... 9 1.1 An Overview of the DiskMaster ...

30 PPPoE Dial-up Setting If you are using an ADSL dial-up network connection with a dynamic IP,DiskMaster can also support ADSL dial-up connec

31 2.2 SYSTEM->Account Management In this section you can define groups and users. The menù consists of four sub-test:  New Accou

32 After entering the parameters click SAVE to make permanent the configuration. When the web server module is installed, you will see a

33 New Group In this section it is possible to create a new group. Type in the field Group the name of the new group. After enteri

34 Account Listing In this section you can see and edit all existing accounts in DiskMaster. It’s possible to see, modify or cancel any account pre

35 When the number of users created is very large, you can use the menù Search to restrict the listo f accounts displayed.

36 Group Listing In this section you can see and modify all the groups existing in the DiskMaster. To modify an account click on

37 When the number of groups created is very large, you can use the menu Search to restrict the list of accounts displayed.

38 2.3 SYSTEM->Backup Management Throught this feature the DiskMaster can make a backup to a remote PC, another DiskMaster or any shared network

39 You can make a local backup, the IP address must be 127.0.0.1. You are strongly advised to use another device to backup data. Backup

4 RAID Configuration... 47 RAID Alarm Settings ...

40 You can select what you want to restore, or check Backup Items to make a full backup. Select from the combo box Backup Date a date and click Re

41 Schedule Backup In this section you can schedule backup processes. DiskMaster can also send an e-mail to the administrator when the process

42 2.4 SYSTEM->System Information In this section of DiskMaster are shown more information about hardware and information about the da

43 System Date In this section you can configure the internal clock of DiskMaster. The DiskMaster will update the clock using the following rules:

44 2.5 SYSTEM->Hard Disk Management The File Server supports SMB/CIFS and allowcs to share folders on PC’s connected in LAN. It’s possible to sh

45 Hard Disk Configuration In this section you can have access to detailed configuration of the disc/discs. DiskMaster partition the disc in four di

46 Identify the partition to replace in the Home, click Replace. DiskMaster will copy the contents of the Home Directory in the new partition. T

47 RAID Configuration Before creating a RAID should verify that all partition are deleted. Delete with Delete all existing partitions

48 To remove the RAID click Reset, in Hard Disk Management->Hard Disk Configuration. Although the configuration is RAID, shows a single di

49 RAID Alarm Settings Check the field Send Out Notices to allow the sending o fan e-mail in case of errors in RAID. After entering the parameters

5 APPENDIX E: MySQL Database ... 89 Status 89 My.cnf Settings ...

50 2.6 SYSTEM->Power Management System Reboot Click Save to reboot the system. All the services will be stopped and the system reboo

51 2.7 SYSTEM->Firmware Upgrade Module Upgrade In this section it is possible to install aditional modules in DiskMaster or upgrade

52 It should be ensured during the entire phase of upgrades, the alimentation to the device. If this fail, the device may not be re

53 2.8 SERVER->File Server The File Server supports SMB/CIFS and allows sharing of folders on PC’s connected in LAN. It’ s possible to share data

54 Settings You can set the name for the Service of File Server (Host Name), WorkGroup and the Description field. After entering the pa

55 Share Folders In this section you can create new folders, and enable them to decide access. DiskMaster creates the defautl public folder, entitl

56  ftp_file: upload. Upload directory for FTP users with anonymous access.

57 To create a new shared folder follow the steps: Click NEW ( ), type in the field Folder Name the name of the shared folder and then in Descriptio

58 To delete a shared folder click on the button ( far right) of the folder itself. DiskMaster asks for confirmation. Click OK to conti

59 To configure access to a folder, once activated, click on the button (Far right) of the folder itself. You will see the image below.  Folder

6 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or b

60 Invalid Accounts, it will be considerate as Invalid Accounts. Therefore in case of conflict: Invalid>Valid  DiskMaster uses the fo

61

62 2.9 SERVER->FTP Server The FTP service (File Transfer Protocol) allows transfer of files over the Internet or local LAN. The menu consists of

63 Status The FTP Service is disabled by default. To enable service check FTP Server Start.When the service is active, you will see the screen below

64 Settings  Host Name: Enter the name of the FTP server.  Listen Port: Generally, the listening port of the FTP server has the number 21. You

65  Test1 is limited to uploads and downloads to 100KBs 400KBs.  Upload Test2 is limited to 100KBs downloads but has no limit

66 Anonymous Settings  Anonymous login Allowed: Check to allow anonymous login.  Maximum number of Logins: Enter the maximum number of

67 Logs The FTP server stores all activities that interest him. There are 2 types of log files..  Secure: stores information such as Date, Time,

68 2.10 GUI->GUI Management In this section you can configure the GUI administration DiskMaster. The menu in question has 5 submenus:  Passwor

69 Password Settings  Username: type your new username. default username is sysadmin.  New Password: type your new password. The default passwo

7 Limited Warranty Our warranties (for hardware and software) do not cover data loss – back up the contents of your drive to a separate st

70 Access management  Device Name: Type the name of the device. The default name is DiskMasterG502D.  Enable SSL Connection: Chec

71 System Info.Setup  Company(Org.)name: type identifier.  Administrator name: type identifier.  Administrator E-Mail: type the email address

72 Notices to Host In this section you can configure the details to enable DiskMaster sending mail.  Host: IPO type the address of the SMTP serv

73 Logs DiskMaster stores all activities that affect the GUI. There are two types of log files:.  Miniserv.log: stores information such as da

74 APPENDIX A: Troubleshooting This chapter covers potential problems and the corresponding remedies. A.1 Using LEDs to Diagnose Problems The LEDs a

75  Password: atlantis  IP address: by DHCP, (If a DHCP server isn’t available in the network, the DiskMaster will use 192.168.1.251 and S

76 sessions at the same time). 2. FTP Server: Maximum is able to create 32 users accounts, 8 users account connect at the same time, and maximum 16

77 APPENDIX B: Tips Before Installation Before installing DiskMaster , please be aware of some key information regarding DiskMaster which will help

78 HDD Mode HDD Total Capacity Remark A B Normal 2TB 2TB 4TB 2 separate HDDs are shown in the system. 2TB is the maximum in each HDD b

79 - /fsys: This area stores system program including native and extenion modules, management data (i.e. user account), system settings informatio

8 Important information for the correct recycle/treatment procedures of this equipment The crossed-out wheeled bin symbol printed on the

80 APPENDIX C: USB Copy DISKMASTER is equipped with 2 USB hosts which supports “USB Mass Storage Device”. One is located on front panel and the othe

81 The picture above shows the USB devices recognized by DISKMASTER system and their mounting structure. Root Directory Home Directory Account Dir

82 particulars of the device)  To make these shared folders via File Server should drag the folder Samba_File.

83 APPENDIX D: WEB SERVER The device also thanks to integrated support for Apache / PHP / MySQL, can function as a real web server

84  Level 1: E 'can only upload a web site, directly into the WWW. Here there are 2 folders html (for HTML) and cgi-bin (for CGI).  Level

85 DiskMaster supports 2 types of CGI, PERL and SHELL (only basic libraries). To access the website hosted just type:  http:// IP addr

86 Virtual Host Settings Host virtual address allows you to use 2 or more domain names, each with their own independent pages. Click NEW (

87 After completing the Virtual Host settings, please click “enable” to activate the settings. PHP INi Settings PHP is used mainly for

88  Access stores information such as date, time, IP address, Username.  Error: stores all abnormal activity.  A single file contains infor

89 APPENDIX E: MySQL Database The device also built MySQL with support, can work as a real SQL database. Click on MySQL Database, you'll see

9 Thank you for purchasing the DiskMaster storage solution. With speed, ease of use, high capacity, and support for numerous applications, Di

90 MySQL Database requires that the Web Server service is installed and active. If it were not so will be appropriately marked.

91 Logs Records the log files of the MySQL status (either as Normal, Error, or Terminated) and is available for the administrator's reference.

92 APPENDIX F: PostgreSQL Database Postgre SQL is a great help (object oriented) to allow the database management SQLI. Click on the Pos

93 PostgreSQL Database requires detailed knowledge for its use. Logs Records the log files of the PostgreSQL status (either as No

94

95 APPENDIX G: DDNS This section explains how to configure Dynamic DNS DiskMaster section. Through the use of this feature, you can registe

96 Status DDNS Service is disabled by default. To enable service check DDNS Setting Start. When the service is active, it will show the screen be

97 Settings Click NEW ( ). The following image will appear where you can configure parameters for access and update the DDNS server.  DDNS Modu

98 If registration is successful and the service activated will show the IP address assigned to the registered domain (normally the responsibil

99 APPENDIX H: iTunes Server Enabling this service allows you to view files in the folders listed directly from iTunes. Click on the iTunes Server,